EGW Remington 4, 6, 7400, 750, 7600, 7615, Benelli Auto/Super Black Eagle/Vinchi, M2, Weaver 93, Stoeger M3000/M3500 Picatinny Rail 0 MOA
Mounting Hardware is Included:
This mount fits (Weaver 93 Pattern):
- Remington Model 4 (red bag of screws)
- Remington Model 6 (red bag of screws)
- Remington Model 7400 (red bag of screws)
- Remington Model 7600 (red bag of screws)
- Remington Model 750 (red bag of screws)
- Remington Model 7615 (red bag of screws)
- Benelli Auto (red bag of screws)
- Benelli Super Black Eagle (red bag of screws)
- Benelli Super Black Eagle II (yellow bag of screws)
- Benelli SBE II (red bag of screws)
- Benelli Super Black Eagle III (yellow bag of screws)
- Benelli SBE III (red bag of screws)
- Benelli Vinci (red bag of screws)
- Benelli M2 (yellow bag of screws)
- Franchi Affinity 3.5 (yellow bag of screws)
- Stoeger M3000 (after ser #1368845) (red bag of screws)
- Stoeger M3500 (after ser #1368845) (red bag of screws)
- Stoegers pre serial # 1368845 have #6-48 screws.
Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Anodizing
Center Spread: 2.05"
Overall Length: 5.488"
Height: .4" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Quick Disconnect Ring Compatible: No
Ambidextrous: Yes
Torque Specs: 20 in/lbs
Mounting Hardware: #8-40 X 1/4 Screws (red bag) and #8-40 X .336" Screws (yellow bag) and T-10 Bit Included
We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.
We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.
Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.
| MANUFACTURER | EGW |